They are making a number of good points regarding What Would Cause My Electric Water Heater to Stop Working? overall in this post further down.
Many modern-day homes take advantage of an electric hot water heater for their heating unit, as a result of its benefit as well as convenience of use. Nevertheless, just like any other electric appliances, troubles may arise with its use, unexpectedly. It can be actually discouraging to wake up to a chilly shower instead of a warm one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the situation might be, water heater troubles can be rather aggravating. Thankfully, we have actually made a listing of feasible services to your hot water heater problems. There are a variety of elements that can trigger most of these issues, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you switch off the primary power supply for safety and security. Whatever the problem is, getting it taken care of should not present too much of a problem if you comply with these actions:
Call An Expert:
If after changing all faulty parts and also resetting your temperature, the hot water heater still isn't functioning, you may need to speak to an expert plumber for an expert point of view. The problem with your heating unit could be that the cold and hot taps have been switched over or it might be undersized for the amount of hot water required in your house. Whatever the case might be, a specialist plumber would assist fix the trouble.
Check Your Power Supply:
As fundamental as this might appear, it is very required. Without sufficient power, your hot water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, merely turn it off and on once again. Change any damaged or damaged fuse. Test the appliance with power after these modifications to see if it's currently working.
Check Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may require to inspect the temperature level setups on your top thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This need to aid heat the water. Turn the circuit breaker back on and check if the problem has been dealt with.
Check the Heating Element in the Water Heater:
If it's not a power problem, then try checking out your heating element if it is still working. Test each of your heating elements to be sure the problem isn't with any one of them. If any one of them is damaged, change that component and after that inspect whether the warm water is back on.
Final thought
Water heater issues are not always major. Many of them are due to small concerns like a blown fuse or damaged burner. Replacing the defective parts should suffice. Nonetheless, if you are still not able to fix the issue, give a call to your nearest plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I ran across that write up about Hot Water Heater Repair while doing a search on the internet. Sharing is nice. One never knows, you could be helping someone out. Thank you for your time. Visit us again soon.
Further Details